Recent content by bramj

  1. bramj

    ADS-B DIY Antenna

    8 Elements Brass-Collinear performing well during Weather Alert Plane's holding and go-around's
  2. bramj

    ADS-B DIY Antenna

    I used belden h-125 coax cable, 5 mm inner 6mm outer
  3. bramj

    Side by side antenna testing

    Very nice setup Tom,
  4. bramj

    Web Portal and Collectd/rrd graphs automated installation

    When i look at the collectd.conf in /etc/collectd/ is see that statistics are loaded data via http (port80) Maybe it works if you add port 82 to the URL like this in the collectd.conf , and restart collected ------------ # Configure the dump1090 python module. # Each Instance block collects...
  5. bramj

    Web Portal and Collectd/rrd graphs automated installation

    There are some issue's reported in this thread. Web Portal and Collectd/rrd graphs automated installation "The hostname it's hardcoded into the installer. The path in my case should be /var/lib/collectd/rrd/banana/dump1090-rpi/. Because of this, the installer didn't even copy/generate the...
  6. bramj

    ADS-B DIY Antenna

    i used this site as example http://www.nodomainname.co.uk/Omnicolinear/2-4collinear.htm
  7. bramj

    ADS-B DIY Antenna

    Coax and brass tube 4 elements Solder Closeup Decouple sleeve 1/4 wavelength
  8. bramj

    Web Portal and Collectd/rrd graphs automated installation

    There is a problem with restarting the collected deamon. maybe the problem is the hostname off the raspberry , its change to "pibeta" --------------------------------- 2015-06-04 11:29:56 (59.8 MB/s) - `collectd.conf' saved [2586/2586] [ ok ] Restarting statistics collection and monitoring...
  9. bramj

    ADS-B DIY Antenna

    Beter then the coax-colinear, at the moment its 8 elements , i will add 4 more elements later, It's raining now, but it is performancing well Also spotted little new plane "HON21" https://www.hondajet.com Hmmmm, to bad its cloudy can see it..:-(
  10. bramj

    ADS-B DIY Antenna

    yes , added screen shot to previous post :-)
  11. bramj

    ADS-B DIY Antenna

    brass tubing 1 hour test run, this is the pattern with 8 elements
  12. bramj

    ADS-B DIY Antenna

    Thanks, coax i used is belden h125 http://www.repeater-builder.com/antenna/wa6svt.html
  13. bramj

    ADS-B DIY Antenna

    my coax colinear failed :-( bad contacts, broken solder joints , so a new experiment building a brass-tube collinear
  14. bramj

    Plane Finder Client Beta3 (3.0.1657)

    up and running
  15. bramj

    ADS-B DIY Antenna

    Thunderstorms developing on north-sea Planes to Londen waiting over Netherlands \ http://www.lightningmaps.org/realtime?lang=en Anyone ideas on Antenna Lightning Protection, I took antenna inside today for thunderstorms
Top