Recent content by FUNG SAI HOU

  1. F

    Automated Installation of Dump1090-Mutability, Data Feeders, and Performance Graphs

    Hi W1PAC, In what Single Board Computer and what OS you currently installed? Which version of dump1090 you chosen to install using the Joe's script? Then Mr. ab cd might have more detail / info to assist you on this matter. 73.
  2. F

    Automated Installation of Dump1090-Mutability, Data Feeders, and Performance Graphs

    Thanks wiedehopf, I was answered with this at the FA forum. Thanks again for the reply. Best regards.
  3. F

    Automated Installation of Dump1090-Mutability, Data Feeders, and Performance Graphs

    Hi all, Is there a way or script that can uninstall / remove the ADSB-Receiver completely? I have ADSB-Receiver Performance Graph installed and the PiAware WEB installed, and in this case the PiAware WEB is not working and taken over by the ADSB-Receiver. If there is a way to let me access...
  4. F

    Is there a way to have my PiAware WEB (Pi IP) and then ADSB-Receiver Page with other port or...

    Is there a way to have my PiAware WEB (Pi IP) and then ADSB-Receiver Page with other port or vice versa. Thank you in advance.
  5. F

    Hello Joe Prochazka, Sorry to private message, I would like to uninstall / remove the...

    Hello Joe Prochazka, Sorry to private message, I would like to uninstall / remove the ADSB-Receiver completely from my Armbian A20, what should I do / type in the SSH terminal so that it will let me remove it completely. Is there any script to let me to use to remove the packages installed? I...
  6. F

    PlaneFinder pfclient Image for Raspberry Pi

    Hello, If PlaneFinder has its own **Pfclient Image for us to download to install in Raspberry Pi with built-in dump1090 with ssh enabled (login ID & password provided), it would be great. **Official pfclient image like PiAware or Pi24. Regards.
  7. F

    PCB ADS-B 1090MHz Antenna

    Yeah, I also waiting for my conduit and end cap. Then can compare the range when place outside and at higher point.
  8. F

    PCB ADS-B 1090MHz Antenna

    Anyway, I will place it outside once I got the conduit & all accessories. Then I will post it here to compare with these two under roof reception.
  9. F

    PCB ADS-B 1090MHz Antenna

    This is my ADSB PCB Antenna receiving range plot after 12 hours. FYI, East & West side is blocked by 4 storey residential apartment. For North West direction which is OPEN no obstruction. North direction is blocked by a 25 storey condominium. My house is just few hundred meters away from the...
  10. F

    PCB ADS-B 1090MHz Antenna

    Sure, I will reset the receiver location coordinates and plot for another chart for the PCB ADSB antenna and see the difference.
  11. F

    PCB ADS-B 1090MHz Antenna

    For your info, antenna is place outside of window but east, west direction is blocked by building blocks, which means my antenna elevation is lower than the building block.
  12. F

    PCB ADS-B 1090MHz Antenna

    Hi, My EXTSHA PC Version is not working as it should. Here is the VRS with range plot for the 1/4wl gp adsb antenna.
  13. F

    PCB ADS-B 1090MHz Antenna

    No problem. Once I got the range plotted, will share to you. Regards.
  14. F

    PCB ADS-B 1090MHz Antenna

    Hi ab cd, FYI, this feeder is the ComStation Xrange from AirNav (PGANRB400063). I will get another new "Station" by installing it in Windows based. Once the range chart is plotted, I will share the link to you. Regards.
  15. F

    PCB ADS-B 1090MHz Antenna

    Hi ab cd, What you mean is swap the 1/4 gp antenna to the existing pcb antenna and see any changes to the range? Or get another pi to run with only the gp antenna? I ask this because the rb24 range will not change after the range is plot. I will try with another pi and see then I will place a...
Top