Recent content by Glenn Stewart

  1. Glenn Stewart

    Raspberry Pi + Resin.io = Feed setup in under an 20 minutes

    I did a new build today. This looks like this: [Info] Starting build for inodes/rtlsdr, user inodes [Info] Dashboard link: https://dashboard.resin.io/apps/420185/devices [Info] Building on ARM01 [==================================================>] 100% [Success] Cached image...
  2. Glenn Stewart

    Raspberry Pi + Resin.io = Feed setup in under an 20 minutes

    The best place to start is here: https://resin.io/how-it-works/ And there are many resources on YouTube regarding git and git remotes. GitHub and Bitbucket have a lot of resources. I work for Atlassian, so I'd be recommending Bitbucket. You can have free private git repositories :) To boil it...
  3. Glenn Stewart

    Raspberry Pi + Resin.io = Feed setup in under an 20 minutes

    Hi Jaxx, The space this refers to is actually at Resin.io itself (or its git repo - your remote). If you go to your device page: https://dashboard.resin.io/apps/739438/devices (only you can access this specific address) Confirm that the command at the top for setting your git remote (which is...
  4. Glenn Stewart

    Raspberry Pi + Resin.io = Feed setup in under an 20 minutes

    A few things to note Once your device is up and running, there are a few things to note. Resin.io allows you to see the status of each device and control it. Devices Page Control your devices See what your local IP address would be See the most recent commit Reboot and connect to your devices...
  5. Glenn Stewart

    Raspberry Pi + Resin.io = Feed setup in under an 20 minutes

    Cloning My Code and Pushing to your Device(s) I've created everything you need code wise to get this working. You don't need to do anything except setup your accounts, and push the code. Open up a terminal (Linux/MacOS) or command prompt (Windows) Clone my repo from...
  6. Glenn Stewart

    Raspberry Pi + Resin.io = Feed setup in under an 20 minutes

    Before Starting Working with Resin.io requires interaction between files on your computer and Resin.io using git. This requires: ssh installed git installed If you have Linux or MacOS, these are already inbuilt. If you have Windows, these do not come preinstalled and will require some...
  7. Glenn Stewart

    Raspberry Pi + Resin.io = Feed setup in under an 20 minutes

    Prerequisites Obviously a Raspberry Pi (2 or 3 is best). A blank micro SD card (16GB preferred, class 10 preferred) RTL-SDR Dongle Access to a command line with git (could be Windows, Linux, Mac OS). A small amount of time. Planefinder account. Other accounts for Flightradar24, Flightaware also...
  8. Glenn Stewart

    Raspberry Pi + Resin.io = Feed setup in under an 20 minutes

    TL;DR Get first Raspberry Pi configured, connected and submitting in 10 minutes Second device in under 5 minutes Changes in around 3 minutes Remote management and control of all devices Solution designed for 1 or many, many Raspberry Devices Intended to solve my need to have Raspberry Pi's in...
  9. Glenn Stewart

    Raspberry Pi + Docker = Feed setup in under an hour

    Awesome. Thank you for that quick pick up Yless. I'll correct it in the original post if I can.
  10. Glenn Stewart

    Raspberry Pi + Docker = Feed setup in under an hour

    Thanks Lee. It does make life easy for people who really don't want to spend too much time configuring, compiling, changing configuration. Because the Docker containers can be rebuilt over and over again, it's very easy to make slight changes, test alternate configurations or upgrade to the...
  11. Glenn Stewart

    Newbie Forum Poster.

    Newbie Forum Poster.
  12. Glenn Stewart

    Raspberry Pi + Docker = Feed setup in under an hour

    Creating Accounts.... In the above post it assumes you have: Planefinder sharecode Flightradar 24 key Flightware login and password You may also just require additional share codes for example for new locations. Docker also makes this easy. New Planefinder Sharecode Pull down planefinder...
  13. Glenn Stewart

    Raspberry Pi + Docker = Feed setup in under an hour

    Procedure Micro SD card in hand, follow the Hypriot OS details via this blog: http://blog.hypriot.com/getting-started-with-docker-on-your-arm-device After logging in as root, blacklist the RLT-SDR driver by adding your specific device to a config file /etc/modprobe.d/rtl-sdr_blacklist.conf with...
  14. Glenn Stewart

    Raspberry Pi + Docker = Feed setup in under an hour

    The aim To quickly install dump1090, planefinder client, flightradar 24 client and flightaware client and be feeding to them in under an hour. Firstly a quick thank you Firstly to Frederik Granna whose blog post http://www.sysrun.io/2015/11/12/raspberry-pi-docker-rtl-sdr/ got me playing...
  15. Glenn Stewart

    Raspberry Pi + Docker = Feed setup in under an hour

    As a long time user and feeder of Planefinder, I wanted my first post to be useful. I am in the process of increasing my number of Raspberry Pi's and sites and have been keen to have an easy way to get from a blank SD card to a running Pi quickly. I have managed to do that recently and wanted...
Top