I am feeding Planefinder and have aircraft on my map, the thing is no aircraft are showing in the logs.
It normally tells you how many aircraft were received.
Anyone have any ideas as to why this is?
When i'm logged into my ADSB Receiver on 192.168.?.??, using Google Chrome i can click on
System Information WORKS
Performance Graphs WORKS
Live Dump1090 Map WORKS
Plane Finder Client NO INFORMATION APPEARS BUT THE OPTIONS ARE ALONG THE TOP.
If i use the...
Still getting the Failed To Parse Error and i'm not sure what to do now as i have NTP installed on the Pi and keep getting the problem, and it's happening more frequently.
2016-05-15 18:33:50.381 [!] Failed to parse response from Plane Finder server: HTTP/1.1 200 OK
I keep getting this message, Failed to parse response from Plane Finder server: HTTP/1.1 200 OK.
It's happening far to often for my liking and if all my data is not being fed to Planefinder then it makes me wonder if i should bother at all.
I'm feeding using an RTL Dongle and a...
I never made the antenna, it as made by a friend. I know the legs are almost vertical and it should be set at a 45 degree angle. The 4mm crimp ring connectors that i purchased are not the strongest and i don't want to try and bend them just in case one might break, but the antenna still...
I'm using a Spider Antenna that someone built for me and it's fantastic. It's made from 2.5mm electrical wire cut into 5 pieces of 69mm in length, and an SO239 connector.
You also need some M3 Pan Head Bolts, M3 Nylon Nuts and M3 Washers, Webro, WF100 Cable, some F Connectors. You...
I have been getting this message for the last couple of days every so often under the Log Viewer, can anyone tell me what is means.
2016-03-02 13:23:16.219841 [!] Failed to parse response from Plane Finder server: HTTP/1.1 200 OK