Recent content by tgo

  1. tgo

    I'm using piaware as my dump how would I add planefinder as a feed.

    I'm seeing planes on the 2d map right away. I think we've cracked it, all stats are showing now. Thank you for your help.
  2. tgo

    I'm using piaware as my dump how would I add planefinder as a feed.

    resetting now :oops: (although in fairness your instruction post shows both port numbers which is confusing) PF Client web interfaces: After SETUP is complete and pfclient is up & running, you can see following in your computer's browser. http:// <ip-address-of-RPi>:30053/map.html (shows...
  3. tgo

    I'm using piaware as my dump how would I add planefinder as a feed.

    Mine is completely blank, no planes on the 2d map either. Uptime shows as: 6hrs 45 and data sent 883.5k, zero planes, zero packets It's odd because the other sites are still working ok
  4. tgo

    I'm using piaware as my dump how would I add planefinder as a feed.

    Nothing showing on live view, my receivers page still says 'inactive' no data received, this screenshot only show this, what has gone wrong?
  5. tgo

    I'm using piaware as my dump how would I add planefinder as a feed.

    I'll add that in stats now, It's saying. Total data sent to Plane Finder 7.641KB (0KB previously) Which I'm hoping means it's now doing something. As an aside, this will auto start each time the Pi is rebooted yes?
  6. tgo

    I'm using piaware as my dump how would I add planefinder as a feed.

    Here we go. * pfclient.service - LSB: planefinder.net ads-b decoder Loaded: loaded (/etc/init.d/pfclient; generated) Active: active (running) since Fri 2020-02-21 13:23:33 GMT; 10s ago Docs: man:systemd-sysv-generator(8) Process: 6699 ExecStart=/etc/init.d/pfclient start...
  7. tgo

    I'm using piaware as my dump how would I add planefinder as a feed.

    Hrmm my receivers show as 'inactive' and 'no data received' do PF need to turn something on?or did I do my config wrong?
  8. tgo

    I'm using piaware as my dump how would I add planefinder as a feed.

    Thank you, set up, not seeing anything yet, how long to see a result? Bit confused about this bit. This will open a new page. On this page enter: Receiver Data Format: Beast How are you connecting to your receiver: Network IP Address: 127.0.0.1 Port Number: 30005 Click "Complete configuration"...
  9. tgo

    I'm using piaware as my dump how would I add planefinder as a feed.

    I already feed 3 other sites using the piaware as my base dump, the other sites all play nicely together. Is it possible to add planefinder as a feed too, using the existing dump and not losing the functionality to the other fed sites? If it is, what do I need to doto achieve that. I don't...
Top