Newbie PF Receiver help - - No MLat


New Member
Hello there, newbie to adsb here.

I just setup the PF receiver, antenna and GPS today.
Ive entered the share code, added the receiver and got the gps antenna onto the roof as well (around 8 metres lower than the 1090 antenna) .

The web interface is showing planes on the map.. ads-b ModeS but there is no multilateration.

I'm wondering if the device has to be activated at the server end to receive MLat?
The logs are showing :

2021-07-07 20:45:45.140373 [!] Data upload failed with error: 'Client not authenticated - local time on client out of limits

However GPS has been found and is OK except " GPS MODE : Over determined Clock"

Anyone advise

Cheers upfront


##EDIT ### All up and running now guys thanks
Last edited: