PFClient sharing software needed for Desktop type Debian

zahidulhasan

zahidulhasan

New Member
Dear All,

This is first post in PF. I am quite experienced in RPI Linux feeding, but very new in mini desktop type Debian which is a INTEL platform processor. PC having dual core 1.8GHz Intel ATOM processor, 2GB RAM, updated Debian 7.8 OS. FR client successfully installed & running on that.

I need help to install PFClient sharing software(Old or New) on this PC.

Anybody can help ? With the help from member jepolch i solved FR issue. Now solution need for PF.

Thanks,
Zahidul Hasan.
PF-6290
PF-9076
 
I will try and get an i386 build built and uploaded today for you. The instructions will be the same as the Pi install.
 
Yes that looks all setup correctly.

You would have been emailed your sharecode in an email and then you can assign it to yourself on the sharing site. Do not share the share code with anyone else

You are using 30003 as a data connection, I would recommend against this and use a raw format.
 
Lee Armstrong said:
Yes that looks all setup correctly.

You would have been emailed your sharecode in an email and then you can assign it to yourself on the sharing site. Do not share the share code with anyone else

You are using 30003 as a data connection, I would recommend against this and use a raw format.
Click to expand...

Dear Sir,

Thank you for your reply. It got delay to receive the mail, that's why i asked. Now everything ok. Now my feeds showing in sharing site. Green marked feeder added, red will be cut off,

I didn't understand what you say in this line. Can you say it in details ?
Lee Armstrong said:
You are using 30003 as a data connection, I would recommend against this and use a raw format.
Click to expand...

Thanks,
Zahidul Hasan.
 

Attachments

  • PF Stats.png
    PF Stats.png
    17.5 KB · Views: 18
You have not said what our client is connecting to as a data source. If it is Dump1090 I would connect to port 30005 using Beast Binary format.

People on this forum who know a bit more about Dump1090 may be able to help
 
Lee Armstrong said:
You have not said what our client is connecting to as a data source. If it is Dump1090 I would connect to port 30005 using Beast Binary format.

People on this forum who know a bit more about Dump1090 may be able to help
Click to expand...

Oh yes, i am in touch of Dump1090 word more then one year. As i told you this same pc also running a FR client, it must have Dump1090. So i used 30003 as port. And its working fine. Thanks for your kind help.

Zahidul Hasan.
 
The preference is to not use 30003 though, use 30005 and "Beast Binary" as the format. You will be missing out on so much extra data
 
Lee Armstrong said:
The preference is to not use 30003 though, use 30005 and "Beast Binary" as the format. You will be missing out on so much extra data
Click to expand...

Ok, Got it, Now seems ok.


2015-04-27 14:06:42.11485 Successfully sent 41 aircraft updates over the past minute (4.00kb)
2015-04-27 14:05:36.903255 Successfully sent 39 aircraft updates over the past minute (4.00kb)
2015-04-27 14:04:24.450997 Successfully sent 14 aircraft updates over the past minute (2.00kb)
2015-04-27 14:03:50.777191 TCP connection established: 127.0.0.1:30005
2015-04-27 14:03:50.776776 Client restarted successfully
 
You must log in or register to reply here.
Back
Top