No. We tried this in the early days and it was so variable that it had no benefit over the "clock" in the receivers.
We timestamp within the FPGA as soon as the signal hits the front end, same place, reliably every signal.
Plane Finder Client 3.5
- Thread starter Lee Armstrong
- Start date
We timestamp within the FPGA as soon as the signal hits the front end, same place, reliably every signal.
Richard Lee
Member
Nice way to keep random processes from varying the AOS time.
So, the New Year drinking is over. I suppose my rig will get a midnight upgrade to 3.5 soon..?.
Have a great 2017, everyone!
Rich<><
So, the New Year drinking is over. I suppose my rig will get a midnight upgrade to 3.5 soon..?.
Have a great 2017, everyone!
Rich<><
Richard Lee
Member
Still have the old 3.4.61 armhf on the Beagle Black Bone.. What's up with version 3.5 ?
Cheers,
Rich
Cheers,
Rich
Richard Lee
Member
Wow, I just looked at the map and wow!!! 3.7.1 armhf has been installed...
I've got to check this out!
Thanks PF guys!
I've got to check this out!
Thanks PF guys!
No problem Richard.
Sorry I hadn't seen this post and you could have had 3.5 too. Next time mail support and we should be able to upgrade you.
ab cd
Senior Member
Thanks Lee!
(1) Upgraded my RPi from version 3.5.469 to version 3.7.1
(2) Updated Installation Guide: https://forum.planefinder.net/threa...-raspbian-dump1090-data-feeder.241/#post-2451
(1) Upgraded my RPi from version 3.5.469 to version 3.7.1
(2) Updated Installation Guide: https://forum.planefinder.net/threa...-raspbian-dump1090-data-feeder.241/#post-2451
ab cd
Senior Member
Found today that new version 3.7.20 is now available for download from page https://planefinder.net/sharing/client
Both old (3.7.1) and new (3.7.20) versions are currently available for download on Pi by wget command:
Both old (3.7.1) and new (3.7.20) versions are currently available for download on Pi by wget command:
Code:
wget http://client.planefinder.net/pfclient_3.7.1_armhf.deb
Saving to: ‘pfclient_3.7.1_armhf.deb’
pfclient_3.7.1_armh 100%[=====================>] 1.11M 5.35MB/s in 0.2s
2017-05-22 15:24:09 (5.35 MB/s) - ‘pfclient_3.7.1_armhf.deb’ saved [1167450/1167450]
wget http://client.planefinder.net/pfclient_3.7.20_armhf.deb
Saving to: ‘pfclient_3.7.20_armhf.deb’
pfclient_3.7.20_arm 100%[=====================>] 1.11M 906KB/s in 1.3s
2017-05-22 15:24:35 (906 KB/s) - ‘pfclient_3.7.20_armhf.deb’ saved [1167112/1167112]Richard Lee
Member
The 3.7.1 is pretty nice.. What's new in the 3.7.20 version?
Mainly small fixes to support the new Radarcape firmware.
3.7.1 worked fine but had issues with MLAT so we did a small bump to 3.7.20 for those. You can upgrade anything else but you won't have any changes!
