Raspberry Pi ADS-B Receiver - No Data, Constant Restarting

loganschapker

New Member
I've been attempting to build an ADS-B receiver with my Raspberry Pi for a while, I've followed the steps listed in the document above the installation files and for some reason it does not obtain and data. I checked the logs and there isn't any errors except for the fact it seems to restart every 10 seconds. I am currently running a FlightRadar24 receiver on my Raspberry Pi with a Nooelec DVB-T stick and it has worked fine for months. Anyone know what a possible cause is?

If you need more information, don't hesitate to ask!
 
Last edited:
It might be worth sharing your settings. The Plane Finder client "restarts" every 10 seconds if it cannot see any data.

Suspect there is a wrong port and/or data type configured on the config
 
Back
Top