Latest activity
-
HHardy2018 replied to the thread Raspberry Pi (B+, Zero, RPi2, RPi3 & RPi4) - Installation instructions for Raspbian, Dump1090 & Data Feeder.Thanks for Your Help
-
ab cd replied to the thread Raspberry Pi (B+, Zero, RPi2, RPi3 & RPi4) - Installation instructions for Raspbian, Dump1090 & Data Feeder.That howto is for old version of dump1090-mutability. New version uses different method. I will update it shortly. EDIT: Updated... -
HHardy2018 replied to the thread Raspberry Pi (B+, Zero, RPi2, RPi3 & RPi4) - Installation instructions for Raspbian, Dump1090 & Data Feeder.Hello ab cd my old RPI finally broke down. On my RPI-4 i Installed Raspbian-Bullseye, and followed your Instruction Dump1090-Mutability...
-
ab cd replied to the thread [Request] Changing pfclient http port from 30053 to custom port.As suggested by @Lee Armstrong , please do modifications in following file: /etc/pfclient-config.json This is easier and safer.
-
CClips replied to the thread [Request] Changing pfclient http port from 30053 to custom port.Thank you all. I shall try this.
-
ab cd replied to the thread [Request] Changing pfclient http port from 30053 to custom port.Thanks Lee. Your method is much easier than what I did in file /etc/init.d/pfclient. I added --web_port=8181 to the line starting with...
-
-
ab cd reacted to Lee Armstrong's post in the thread [Request] Changing pfclient http port from 30053 to custom port with
Like.
You can actually add something to the config file in `/etc/pfclient-config.json` to do this. "web_server_port" - set this to whatever... -
Lee Armstrong replied to the thread [Request] Changing pfclient http port from 30053 to custom port.You can actually add something to the config file in `/etc/pfclient-config.json` to do this. "web_server_port" - set this to whatever...
-
ab cd replied to the thread [Request] Changing pfclient http port from 30053 to custom port.The modification is simple, but the problem is that a little mistake in modification will result in pfclient to fail. I can try to...
-
CClips replied to the thread [Request] Changing pfclient http port from 30053 to custom port.And "where" should i look in that file please? ;)
-
ab cd replied to the thread [Request] Changing pfclient http port from 30053 to custom port.It can be done by modifying file /etc/init.d/pfclient , but as Planefinder wont like users to screw their feeder, I wont post the...
-
-
HFound a way to get around the issue by using redirects with lighttpd: cat $:/etc/lighttpd/conf-enabled/70-planefinder-redirect.conf...
-
Hherren reacted to ab cd's post in the thread pfclient clogs dpkg and installation of other SW with Like.
You both have old OS (piaware 3.8.1 image which is Raspbian Buster based). Current piaware image is ver 8.2 and is Bullseye based. Old...
-
Hherren replied to the thread [Request] Changing pfclient http port from 30053 to custom port.Hey thanks for your response. Are there any plans for the dev team to implement this feature? edit: I found the feature request page so...
-
Mudkekz replied to the thread Raspberry Pi (B+, Zero, RPi2, RPi3 & RPi4) - Installation instructions for Raspbian, Dump1090 & Data Feeder.Step 3 resolved everything. I used my Pi IP address rather than router address. Thank you.
